PlaneWave Interface 3 (PWI 3)

Control software for IRF90 / Hedrick Focuser and Delta-T accessories on CDK12.5 thru CDK24 Telescopes

PlaneWave Interface 3.4.0 - Latest stable release -

PlaneWave Interface 3.4.1 Beta 2 - Latest experimental release -
View Recent Changes

Controls the IRF90 and Hedrick Focuser accessories that connect via the Electronic Focuser Assembly (EFA), along with the Delta-T Heater on PlaneWave telescopes. Includes ASCOM Focuser and Rotator drivers. Compatible with most CDK12.5, CDK14, CDK17, CDK20, and CDK24 telescopes.

If you communicate with your EFA through a cable connected to a Celestron hand controller, please install PWI Focus instead. If you wish to use PWI3, please contact PlaneWave Instruments for information on a cable upgrade kit.

---

PlaneWave Interface 4 (PWI 4)

Control software for L-Series mounts and the PW1000

View Recent Changes

Controls the L-series direct-drive mounts (L-350, L-500, L-600) as well as the 1-meter PW1000 telescope system.

---

SiTech Interface (STI)

Control software for A200 and Mathis fork mounts

STI 1.4.3 Final – Latest stable release -

APM Catalog Installer – for PlateSolve -

STI Southern Hemisphere Config for A200 -

View Recent Changes

Controls PlaneWave A200 German Equatorial mount and Mathis fork mounts that use a Sidereal Technology control system. Includes an ASCOM mount driver.

---

PlaneWave Interface 2 for CDK700 (PWI 2)

Control software for CDK700 telescopes

View Recent Changes

Controls the mount, focusers, rotators, M3 mirror, and auxiliary hardware on PlaneWave CDK700 telescopes.

---

PlaneWave Mirror Cover Control (PWShutter)

PlaneWave Mirror Cover Control 1.4.0 -

Controls the optional mirror cover system for PlaneWave telescopes.

---

PWI Focus

PWI Focus 1.0.20 -

ASCOM Driver for PWI Focus -

Used for CDK telescopes that connect to the EFA via a Celestron hand controller.

PWI Focus is no longer supported. If you wish to upgrade to the latest supported version of the PWI control software, please contact PlaneWave Instruments about a PC Cable Upgrade Kit.

---

PlateSolve 2

Standalone version of the PlateSolve utility. If you are downloading PWI3, STI, or PWI2 for CDK700, PlateSolve is already included and does not need to be downloaded separately.

---

L-Series Mount Firmware Update and Ethernet Configuration Utility

Update your L-Series firmware to the latest version, and configure the IP address settings in order to use your L-Series mount over the built-in Ethernet port.

L-Series Mount Utility -

---

Delta-T Firmware Update

Delta-T Firmware Update (firmware 1.0.13219 and 2.1.16054) -

Update your Delta-T firmware to the latest version.

---

EFA Firmware Update

EFA Firmware Update (firmware 1.06) -

Update your EFA box to the latest version.

---

Hand Controller Update

Hand Controller Update (firmware 1.02) -

Update your Celestron-branded hand controller to the latest version.